In-Line Flow Meter
MicroThermics In-Line Flow Meter (IFM) can be connected nearly anywhere in your process and provides a convenient output display. The remote display can be mounted on a stand or integrated into a system during assembly. Most MicroThermics systems display product flow rate based on the speed of the motor. The In-Line Flow Meter provides actual measurement of the product flow rate. This reduces the need to calibrate the system’s display for new stators, and allows more reproducible and reliable maintenance of product flow as stators age. It is especially useful for systems equipped for pumping hot materials like steam injection modules and systems because product flow often changes with temperature, and motor speed is only a fair indication of flow rate. The IFM is also available with an empty pipe alarm which can be used to trigger a warning indicating when the pump may be running dry. The IFM is part of the upgrade path to actual flow-based pump control.
How It Works
The IFM is an electromagnetic flow meter that senses the movement of an electrically conductive product through a magnetic field created by the sensor. Movement of the product through this field produces a voltage that is proportional to flow rate. The sensor measures this voltage and converts it to flow rate. Products must have minimum conductivity of 5 μS/cm. Nearly all food products exceed this value. Distilled and de-ionized water cannot be measured.
Features
Simple installation and use by sanitary Triclamp® connections
PFA sensor for cleaning and sterilization
3-A Authorized and EHEDG-tested
All stainless steel housing
Portable (Stand-alone Version)
CIP Cleanable and sterilizable in-place (SIP)
0.5% accuracy (0.2% optional)
Back-lit display
Signal outputs: 4-20 mA
Options
• Stand (stand-alone construction only)
• Signal outputs: frequency,
plus HART and Profibus Interfaces
• Upgraded accuracy: 0.2% O.R.
• Empty pipe alarm and warning buzzer or light
• Stand-alone or integral construction
as part of a new MicroThermics system
Specifications
• Accuracy: 0.5% O.R. (0.2% O.R Optional)
• Power Usage: AC<15 VA, DC <15W
• Electrical: 85-260 VAC 1Ø, 45-65Hz
• Protection: NEMA 4X (IP67) (Stand-alone)
• Output: 4-20 mA passive, 0/4-20 mA active
• Interfaces: HART® PROFIBUS
Options Page 1 Options Page 2 Conductivity Inlet Funnel Flow Meter
Bantam Electric Development Electra Flex Mini Miniature Plant Trial Services Microwave Options Steam Steam Injection
